3D Systems ProJet CJP x60
Create stunning, full color concept models fast and affordably.

Affordable and fast full-color prints
The 3D Systems ProJet CJP x60-Series creates stunningly beautiful, full color parts like no other 3D printers can. With some of the fastest print speeds available, you can transform your ideas into photo-realistic concept models and prototypes in hours, at a very low cost per part.
Communicate better, sell your ideas more effectively, unlock creativity, develop products faster, and close more business.
Full color 3D printing like no other
Generous build volumes coupled with the unique ability to nest parts horizontally and vertically make these printers perfect for high-throughput applications. Using 3D Systems’ ColorJet Printing (CJP) technology and the high-performance VisiJet® PXL™ material, the x60-Series print parts with crisply defined features and precise color, so you can evaluate physical models of design concepts in their nearly finished state.
The reliable and affordable CJP technology lets you print parts at up to 7x lower cost than other technologies. Featuring efficient material use, you will eliminate waste and reduce finishing time as no supports are necessary and unused core material is recycled. The ColorJet printers requires only minimal training and expertise to generate a consistent, satisfying output every time.

Why choose the 3D Systems x60-Series?
There are plenty of reasons. Here are three important benefits:
- Print in professional-quality full CMYK color
- Fast print speeds, generous volume and low operating cost
- Easy post-processing with no supports to remove
Features
- Technology: Color Jet Printing (CJP)
- Build volume: up to 508 x 381 x 229 mm
- Layer thickness: 0,1mm
- Materials: Plaster

Polar Electro Oy
Meillä on tapana aloittaa 3D-tulostus heti, kun saamme idean uudesta tuotteesta. Tämä on meille todella suuri etu, koska sen ansiosta saamme tulostettua osia alle päivässä.

Lue lisää 3D-tulostuksesta
-
Uudessa Peel 3D -skannerissa on älykkäitä toimintoja
Peel 1- ja Peel 2 -skannerien menestyksen jälkeen Creaformin tuotemerkki Peel 3D on julkaissut ammattilaistason Peel 3 -skannerin. Alan ensimmäisenä, siinä on käytössä haptinen (eli…
-
Mitä 3D-tulostus on ja miten sitä käytetään?
Olitpa alalla uusi tai kokenut käyttäjä, tässä on esitelty muutamia käytetyimpiä 3D-tulostustekniikoita. Niillä kaikilla on oma tarkoituksensa, ja niitä voidaan käyttää useisiin sovelluksiin. 3D-tulostus, eli…
-
Osien 3D-tulostus ratkaisee toimitusketjun haasteita
Riippumatta siitä, mikä maailmanlaajuisen toimitusketjukriisin aiheutti, tuotantoyhtiöiden kannalta kyse on yhdestä asiasta: Tuotannon kannalta elintärkeiden osien puute. Kun kohdataan toimitusketjun haasteita, 3D-tulostus voi olla tärkeä…

Tutustu tiimiin
Tiimimme koostuu intohimoisista, uteliaista ja asiantuntevista ihmisistä, jotka auttavat sinua löytämään oikean ratkaisun tarpeisiinne.
Pyydä tarjous
Hei! Meille on ensiarvoisen tärkeää, että saavutat tavoitteesi, ja haluamme auttaa sinua matkallasi. Ota meihin yhteyttä jo tänään, niin suunnittelemme juuri sinulle sopivan tarjouksen, joka täyttää kaikki toiveesi.