DyeMansion Powershot S
The leading blasting system for end-use parts with a superior finish

Achieve great looking parts with the Powershot S
The automated mechanical Powershot S is the most efficient process on the market to achieve the best end-use part finish. The solution delivers a unique matt-glossy look and pleasant haptics for the majority of 3D printed end-use applications. It does not remove any material and works perfectly for hard plastics like PA12 or PA11 across all geometries. With a cycle time of only 10 minutes and a capacity of a mid–sized build job per run, the Powershot S works very cost-effectively.
Using the automated PolyShot Surfacing, instead of time-consuming abrasive methods like tumbling, increases your productivity and part quality significantly.
Efficient surfacing technology for end-use parts
The Powershot S is based on a technology called PolyShot Surfacing, PSS.
By shooting beads accelerated with compressed air equalizes the peaks and lows of the surface, achieving a more homogenous part quality.
The pores are closed during the process and the result is a significantly improved, uniform surface.
This is particularly important for further processing steps, such as chemical dyeing techniques in a water bath. The dyes are taken up much more homogenous from the base material.

Why choose DyeMansion Powershot S?
- Fast and efficient with consistent matt or glossy results
- Reduce equipment footprint
- Reduce manual labour cost and time
- Best end-use finish and key to maximum coloring results
Features of DyeMansion Powershot S
- 5-15 minutes variable cycle time
- Robust and sturdy design
- Stainless steel cabinet
- High performance nozzles

Polar Electro Oy
Meillä on tapana aloittaa 3D-tulostus heti, kun saamme idean uudesta tuotteesta. Tämä on meille todella suuri etu, koska sen ansiosta saamme tulostettua osia alle päivässä.

Lue lisää 3D-tulostuksesta
-
Uudessa Peel 3D -skannerissa on älykkäitä toimintoja
Peel 1- ja Peel 2 -skannerien menestyksen jälkeen Creaformin tuotemerkki Peel 3D on julkaissut ammattilaistason Peel 3 -skannerin. Alan ensimmäisenä, siinä on käytössä haptinen (eli…
-
Mitä 3D-tulostus on ja miten sitä käytetään?
Olitpa alalla uusi tai kokenut käyttäjä, tässä on esitelty muutamia käytetyimpiä 3D-tulostustekniikoita. Niillä kaikilla on oma tarkoituksensa, ja niitä voidaan käyttää useisiin sovelluksiin. 3D-tulostus, eli…
-
Osien 3D-tulostus ratkaisee toimitusketjun haasteita
Riippumatta siitä, mikä maailmanlaajuisen toimitusketjukriisin aiheutti, tuotantoyhtiöiden kannalta kyse on yhdestä asiasta: Tuotannon kannalta elintärkeiden osien puute. Kun kohdataan toimitusketjun haasteita, 3D-tulostus voi olla tärkeä…

Tutustu tiimiin
Tiimimme koostuu intohimoisista, uteliaista ja asiantuntevista ihmisistä, jotka auttavat sinua löytämään oikean ratkaisun tarpeisiinne.
Pyydä tarjous
Hei! Meille on ensiarvoisen tärkeää, että saavutat tavoitteesi, ja haluamme auttaa sinua matkallasi. Ota meihin yhteyttä jo tänään, niin suunnittelemme juuri sinulle sopivan tarjouksen, joka täyttää kaikki toiveesi.